Gravador De Eprom Beeprog ((FREE)) Crack
Gravador De Eprom Beeprog Crack === https://tlniurl.com/2tBc6z
How to use Gravador De Eprom Beeprog to program devices
Gravador De Eprom Beeprog is a software that allows you to use the BeeProg+ universal device programmer from Elnec to program various types of programmable devices, such as EPROMs, Flash memories, microcontrollers, PLDs and more. The BeeProg+ programmer is a very fast and reliable programmer that can be connected to your PC via USB or parallel port. It has 48 powerful pindrivers that can handle any DIL device without an adapter. It also has an ISP connector for in-circuit programming of ISP capable chips.
In this article, we will show you how to use Gravador De Eprom Beeprog to program devices with the BeeProg+ programmer. You will need the following items:
A PC with Windows XP or higher (32-bit or 64-bit)
A BeeProg+ programmer with a power supply and a USB or parallel cable
A device to be programmed and a suitable programming adapter (if needed)
The Gravador De Eprom Beeprog software (you can download it from here)
Follow these steps to program your device:
Install the Gravador De Eprom Beeprog software on your PC. You may need to restart your PC after installation.
Connect the BeeProg+ programmer to your PC via USB or parallel port. Make sure the power supply is plugged in and switched on.
Launch the Gravador De Eprom Beeprog software. You should see a window like this:
Select the device type and name from the drop-down menus. You can also use the Device Search function to find your device by entering its part number or keywords.
Insert your device into the ZIF socket of the BeeProg+ programmer or into the programming adapter (if needed). Make sure the device is oriented correctly and aligned with the pin 1 indicator.
Click on the Read button to read the contents of your device. You can also click on the Blank Check button to verify if your device is empty.
Click on the Load button to load a file with the data you want to program into your device. You can also edit the data manually in the buffer window.
Click on the Program button to program your device with the data in the buffer. You can also click on the Verify button to compare the data in your device with the data in the buffer.
Click on the Save button to save the contents of your device into a file.
Remove your device from the ZIF socket or from the programming adapter.
Congratulations! You have successfully programmed your device with Gravador De Eprom Beeprog and BeeProg+ programmer.Troubleshooting tips for Gravador De Eprom Beeprog and BeeProg+ programmer
If you encounter any problems while using Gravador De Eprom Beeprog and BeeProg+ programmer, here are some tips to help you solve them:
Make sure your PC meets the system requirements for Gravador De Eprom Beeprog software. You need Windows XP or higher (32-bit or 64-bit), at least 256 MB of RAM, and a free USB or parallel port.
Make sure your BeeProg+ programmer is connected to your PC properly. Check the power supply, the USB or parallel cable, and the LED indicators on the programmer. The green LED should be on when the programmer is powered up, and the red LED should blink when the programmer is communicating with the PC.
Make sure your device is supported by Gravador De Eprom Beeprog software. You can check the list of supported devices in the software or on the Elnec website. If your device is not supported, you can request a new device support by using the AlgOR service.
Make sure your device is inserted into the ZIF socket or into the programming adapter correctly. Check the orientation, alignment, and contact of the device pins. If you use a programming adapter, make sure it is compatible with your device and with the BeeProg+ programmer.
Make sure your device is not damaged or corrupted. Try to read your device with another programmer or test it on another circuit. If your device is faulty, you may need to replace it.
Make sure your data file is valid and compatible with your device. Check the file format, size, checksum, and protection bits. If you edit the data manually in the buffer window, make sure you enter the correct values for each byte.
Make sure you select the correct device type and name in Gravador De Eprom Beeprog software. If you use the Device Search function, make sure you enter the exact part number or keywords of your device.
Make sure you follow the correct programming procedure in Gravador De Eprom Beeprog software. Read the instructions and tips in the software carefully before performing any operation.
If none of these tips help you solve your problem, you can contact Elnec technical support for further assistance. 061ffe29dd